Magnetic Flow Meters
DigitalMag 888 signal converter is used together with DigitalMag 888 flow sensor to form a complete magnetic flowmeter system for accurate liquid flow measurement. It utilizes state-of-the-art technologies in digital signal processing and electromagnetic sensor design. The converter is able to measure bidirectional flow and totalize the flow in both forward and reverse directions separately.
DigitalMag 888 magnetic flowmeter has been widely used to measure the volume of conductive liquids such as water, sewage, acid, alkali, salt water as well as mixture of liquids and solids.
Accuracy: ±0.5% of the value displayed. ±0.3% is selectable
Caliber: DN10～DN3000mm (3/8″～120″)
Nominal Pressure: 0.6～4.0MPa
Liner material: Teflon, PFA, F46, Neoprene, Polyurethane.
Electrode type: General type, scraper type or replaceable type.
Electrode material: 0Cr18Ni12M02Ti, Hastelloy B, Hastelloy C, Titanium, Tantalum, Platinum-iridium, Stainless steel covered with tungsten.
Remote type: Neoprene & Polyurethane Liner -10°c～+80°c
PTFE, PFA, F46 Liner -100°c～+1600°c
Ambient Temperature: -250°c～+600°c
Ambient Humidity: 5～100%RH (relative humidity)
Medium Electrical conductivity: ≥15ūs/cm standard. ≥5ūs/cm upon request.
Measuring Range: 1500:1, flow rate≤15m/s
Structure Type: Integral type, remote type, submersible type, ex-proof type.
Protection Class: IP65 standard. IP68 optional.
IP65: dustproof and watertight
IP68: dustproof and submersible for long term (only for remote type)
Product Standard: JB/T9248-1999 Electromagnetic Flowmeter